Is overpowering 70W Speakers with 100W Amp safe? - best 100w speakers
Therefore, I believe, for some speakers, which currently has an RX-V359B 100W RMS per channel to receive. According to the statements of speakers, rear speakers handle the power consumption of 10-70 watts, but front and center channel can handle 200W and 100W respectively. Is it possible, on the back, without blowing it or they use so that the usual damage to them?
4 comments:
Hello. Part of the problem has become ill and seeking information. The rear speakers that you see is probably just as ineffective as the speaker delivers more useful now. Speakers include electric motors and simple. They differ in performance and Corvettes Volkswagen do.
The real question is to ask: What is the blow that I return path before it reaches my speakers, the sound pressure level (SPL) in my room I want?
The only specification that tells you what is out of the speakers, the specification of SPL. It reads like, 95 dB at 1W/1m. This means that only 1 dB to watts RMS per channel at one meter from the SPL 95th Almost none of the speaker systems, the spec. If more than 90 dB in order to buy it. Every 2 or 3 dB is an apparent doubling our level of apparent. (Can not remember what had been for a long time, but you get the idea.)
If you like a speaker system, ask the seller for the specification of SPL. Nobody but you know how high you want the explosion. I want to blow the doors off.
Is perhaps what I say, go for the best specification you can get, but usually not covered elsewhere.
No one can honestly answer your question as follows, except in this way.
99 of 100 times a speaker "hits" in that no excessive force placed on him, but because an amplifier has been pressed too hard and "cut".
Send a high, distorted signal to a loudspeaker and voice coil damage.
Thus, while 100 watts per channel amplifier, it will not dominate anything but the smallest, most poorly made speakers, if pushed. It can "clip" and all the wounded from the speakers, not only on the shelves.
We also need to know are listening in surround sound, concentrating most of the signals in the three front channels. Breeding rare and are mainly used for ambience, foley effects, etc. Therefore, it is doubtful that the youth are corrupted by the front speakers.
Just do not fool with volume control, hold the receiver well ventilated, and you should enjoy from the location, year of use from your computer.
Hope this helps.
A good amp should be able to examine the relative power delivered to each speaker - not whether to change. The speakers themselves have a safety margin may not be published, but can vary from 1, 100W. So I can blow your speakers are 71W and 140W can be good - do not know until you blow, but when> 70W no recourse with the manufacturer.
A good amp should be able to examine the relative power delivered to each speaker - not whether to change. The speakers themselves have a safety margin may not be published, but can vary from 1, 100W. So I can blow your speakers are 71W and 140W can be good - do not know until you blow, but when> 70W no recourse with the manufacturer.
Post a Comment